1. For the construction of Jinan color steel plate house in rainy days, a temporary protective shed shall be established to avoid the rain falling on the hot welding site. The welding site shall be relatively wet. Before welding, it must be wiped with a dry cloth and dried with an oxyacetylene flame to keep the joint drying without residual moisture.

　　2.施工過程中，避免用鋒利的工具接觸表面涂層。切割后，清理表面鐵屑，不要將表面分散。如果構件上有水，在安裝前應進行清洗，但不得損壞涂層。高強度螺栓連接安裝時，構件摩擦表面應清潔，不得有水珠，更不要說弄濕、沾污、沾油。雨天組件不能繪制。

　　2. During construction, avoid using sharp tools to contact the surface coating. After cutting, clean the surface iron chips and do not scatter the surface. If there is water on the component, it shall be cleaned before installation, but the coating shall not be damaged. During the installation of high-strength bolt connection, the friction surface of the component shall be clean and free from water drops, let alone wetting, contamination and oil. Components cannot be drawn on rainy days.

　　3.雨天由于空氣潮濕，電極貯存應防潮并烘干，同一電極重復烘烤次數不應超過兩次，并由管理人員及時進行烘烤記錄。

　　3. In rainy days, due to the humid air, the electrode shall be kept damp proof and dried, and the repeated baking times of the same electrode shall not exceed twice, and the baking record shall be made by the management personnel in time.

　　以上是濟南彩鋼板房制造商小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://szgdbearing.com

　　The above is the relevant content introduced by Jinan color steel panel house manufacturer. To learn more, please visit the website: http://szgdbearing.com