我們都知道,當我們建造拖車時,我們都知道我們需要選擇一個平坦的地方來建造拖車。為什么我們?cè)诮ㄔ旃こ贪宸康臅r(shí)候要找一個平坦的地方呢?很多人不理解這個要求。
We all know that when we build trailers, we all know that we need to choose a flat place to build trailers. Why do we need to find a flat place when building engineering plank houses? Many people don't understand this requirement.
1. 在工程板房的建造中我們需要選擇一些平地的原因是我們?cè)诮ㄔ旃こ贪宸康臅r(shí)候肯定不會單獨清理地面,所以我們必須選擇平地作為施工現場,這樣會比較簡單。
1. The reason why we need to choose some flat ground in the construction of the Engineering Plank house is that we will certainly not clean the ground alone when building the Engineering Plank house, so we must choose flat ground as the construction site, which will be relatively simple.
2. 我們還在地面上建造了工程板房。板房的支撐點是,如果地面不平,你建的板房就會變形。你不喜歡在這樣的環境中在地面上工作,所以選擇平坦的地方建造板房的原因是一樣的。
2. We have also built engineering plank houses on the ground. The supporting point of plank house is that if the ground is uneven, the plank house you built will be deformed. You don't like to work on the ground in such an environment, so the reason for choosing a flat place to build a plank house is the same.
濟南工程板房?jī)?nèi)的電線采用PVC管(槽)布線,整齊美觀,電氣配置符合設計要求,電線不老化絕緣,連接長度不長。粘貼墻板安裝正確,表面光滑,預埋墻板安裝平穩,設置上下搭接,外板向下搭接,搭接長度不小于15mm。
The wires in the board room of Jinan project adopt PVC pipe (slot) wiring, which is neat and beautiful. The electrical configuration meets the design requirements. The wires are not aged and insulated, and the connection length is not long. The installation of pasted wallboard shall be correct, the surface shall be smooth, the installation of embedded wallboard shall be stable, the upper and lower lapping shall be set, the outer plate shall be overlapped downward, and the overlapping length shall not be less than 15mm.
防火:防火間距應符合設計和規范要求,消防通道應暢通;消火栓和滅火器應按照設計要求配置,合理布置;在廚房等有火災的地方應采取有效的防火保溫措施;金屬夾芯板的氧指數不得低于32;木地板等易燃材料應進行防火處理。
Fire prevention: the fire prevention distance shall meet the design and specification requirements, and the fire fighting passage shall be unblocked; the fire hydrant and fire extinguisher shall be configured and arranged reasonably according to the design requirements; effective fire prevention and insulation measures shall be taken in the kitchen and other places where there is fire; the oxygen index of the metal sandwich panel shall not be less than 32; the fire prevention treatment shall be carried out for the wood floor and other combustible materials.
防腐蝕:鋼構件油漆良好,無銹蝕,暴露在外的螺栓應做好防護。強腐蝕環境下的防腐措施應滿足設計要求;工程板房周圍應排水通暢,無積水,無雜物。
Anti corrosion: the steel members shall be well painted and free from corrosion, and the exposed bolts shall be well protected. The anti-corrosion measures under the strong corrosion environment shall meet the design requirements; the drainage around the engineering board room shall be smooth, without ponding and sundries.
以上是
濟南工程板房小編為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站:http://szgdbearing.com
The above is the relevant content introduced by Jinan engineering board house small edition. If you want to know more, please visit the website: http://szgdbearing.com