1. Steel: generally, some corrosion-resistant steel is selected for prefabricated house, which is generally called weathering steel; the weathering steel contains phosphorus, copper, nickel, chromium, titanium and other metals, which will form a high protective effect on the steel surface, so as to improve the corrosion resistance of the steel; the movable plank house is directly facing the natural climate of sunlight, rain, frost and snow, and the low-temperature impact toughness of the weathering steel is also It is superior to ordinary structural steel.

濟南活動板房

Jinan mobile board house

2.高溫鋅：熱浸鋅是一種耐高溫產品；其制作工藝達到600度高溫浸泡。鋼構件表面有這樣一層鋅層，而且鋅層的厚度已經達到了5微米，而且附著在鋼構件表面的鋅層也有詳細規定，薄板不得小于65微米，厚板不得小于86微米。從而耐高溫，耐腐蝕。這種工藝的優點是高溫不易變化，周期長，質量有保證。因此，本產品廣泛應用于戶外大型鋼結構，然后清洗；對于鋼結構的設計，我們應避免設計有粘結面的構件，以避免粘結面縫隙中酸洗不徹底或酸洗；導致鍍鋅表面出現黃水。熱浸鋅是在高溫下進行的。

2. High temperature zinc: hot dip galvanizing is a kind of high temperature resistant product; its production process reaches 600 ℃ high temperature immersion. There is such a layer of zinc layer on the surface of steel member, and the thickness of zinc layer has reached 5 μ m, and the zinc layer attached to the surface of steel member is also specified in detail. The thin plate shall not be less than 65 μ m, and the thick plate shall not be less than 86 μ M. Therefore, it is resistant to high temperature and corrosion. The advantages of this process are that the high temperature is not easy to change, the cycle is long and the quality is guaranteed. Therefore, this product is widely used in outdoor large-scale steel structure, and then cleaning; for the design of steel structure, we should avoid the design of components with bonding surface, so as to avoid incomplete pickling or pickling in the gap of bonding surface, resulting in yellow water on galvanized surface. Hot dip galvanizing is carried out at high temperature.

3.涂層方法：涂層的耐蝕性一般不如高溫鋅，所以室外鋼結構多用在室內鋼結構或相對容易維護。這種涂料的特點是成本低，更多地用于室內鋼結構。這種涂料防銹，不需要耐高溫，也不需要直面大自然的氣候。涂裝法施工的步是除銹，涂裝比高溫鋅除銹要求更高，所以要求高的涂裝一般采用噴砂噴丸去除全部鐵銹和油污。野外施工的涂料可以手工除銹。涂層對環境要求更高。涂料施工環境要少揚塵，構件表面不能有灰塵，涂裝后四小時內不能下雨。不同的涂層對不同的腐蝕條件有不同的抵抗能力。

3. Coating method: the corrosion resistance of coating is generally not as good as that of high temperature zinc, so outdoor steel structure is mostly used in indoor steel structure or relatively easy to maintain. This kind of coating is characterized by low cost and is more used in indoor steel structure. This kind of coating is rust proof and does not need to be resistant to high temperature and natural climate. The first step of coating method is rust removal, which requires more than high temperature zinc rust removal. Therefore, sandblasting and shot peening are generally used to remove all rust and oil stains. The paint applied in the field can be derusted by hand. The coating has higher environmental requirements. There should be less dust in the coating construction environment, there should be no dust on the surface of the components, and there should be no rain within four hours after coating. Different coatings have different resistance to different corrosion conditions.

4.熱噴涂鋁(鋅)復合涂層：該涂層的優點是對構件尺寸具有較強的適應性，幾乎可以制成零件的形狀和尺寸。另一個優點是，該涂層的高溫是局部的，因此不會因高溫而發生變化。

4. Thermal spraying aluminum (zinc) composite coating: the advantage of the coating is that it has strong adaptability to the size of components, and can almost be made into the shape and size of parts. Another advantage is that the high temperature of the coating is local, so it will not change due to high temperature.

與此相結合，鋼結構活動板房的耐蝕性越來越強，現代工藝處理也越來越完善?；顒影宸康闹饕Y(jié)構是鋼，活動板房的質量取決于鋼的質量和涂層的質量。

Combined with this, the corrosion resistance of steel structure movable plank house is more and more strong, and the modern process treatment is also more and more perfect. The main structure of prefabricated house is steel. The quality of prefabricated house depends on the quality of steel and coating.