在
濟南活動板房的建設中，要搞好防范措施和注意事項，使活動板房更為牢固，事實上，不但是活動板房，一切施工工地都需要搞好防范措施，使我們一起來看看怎樣做到它，它須嚴格執行施工進度計劃實行。
In the construction of movable plank houses in Jinan, we should do a good job in safety precautions and precautions to make the movable plank houses more solid. In fact, not only movable plank houses, but also all construction sites need to do a good job in safety precautions. Let's look at how to achieve it. It must be implemented in strict accordance with the construction schedule.
先要注意的是，一切螺絲或有關部件都可以自由拆裝，由于那樣的挪動室是利用不一樣的部件相互連接的，假如拆卸了，將危害挪動室的穩定度和特性，包含必須注意排污溝的建設，以防止存水的產生。
First of all, it should be noted that all screws or related components can be disassembled freely. Since such mobile chambers are connected with each other by different components, if disassembled, the stability and characteristics of the mobile chamber will be endangered, including the construction of sewage ditches to prevent water storage.
除此之外，假如要在活動板房中日常生活，不太可能在房間內，尤其是爐具等房間內采用用火，對一些相對性非常容易浸蝕的部位開展按時的防銹處理和漆料，便于進行對應的設備維修保養工作中。
In addition, if you want to live in a movable plank house, it is unlikely to use fire in the room, especially in the stove and other rooms. Carry out timely rust prevention treatment and paint on some relatively easy to etch parts, so as to facilitate the corresponding equipment maintenance.
進而增加移動板房的使用期限，防止危害其使用期限，包含挪動屋子自己的承載力是有局限的，因此在應用它時，先事前掌握承擔規范，才可以進行應用。
In order to increase the service life of the mobile plank house and prevent endangering its service life, including the bearing capacity of the mobile house itself, there are limitations. Therefore, when applying it, it is necessary to master the bearing specifications in advance before it can be applied.
1、房屋的面板應裝穩定，房檐該是直的，面板的鋼筋搭接方位應恰當和一致。
1. The panel of the house should be installed stably, the eaves should be straight, and the overlapping orientation of the reinforcement of the panel should be appropriate and consistent.
2、活動板房的電源電路應遮蓋PVC管(槽)，走線齊整美觀大方，電氣設備構造合乎設計規定，無絕緣衰老，使用期限長。
2. The power circuit of the movable plank house shall be covered with PVC pipes (grooves), with neat and elegant wiring, and the electrical equipment structure shall meet the design requirements, without insulation aging and long service life.
3、活動板房的圍護結構板(屋頂板和板墻)不應該有突出的形變和毀壞;固定不動地腳螺栓、防潮密封圈、金屬材料密封圈、尼龍板等需詳細靠譜，密封劑要詳細合理。
3. The enclosure structure plate (roof plate and plate wall) of the movable plank house shall not have prominent deformation and damage; Fixed anchor bolts, moisture-proof sealing rings, metal sealing rings, nylon plates, etc. shall be detailed and reliable, and the sealant shall be detailed and reasonable.
4、避雷:防雷接地線設備合乎設計方案和標準規定，接地線電阻應符合規定。
4. Lightning protection: the lightning protection grounding wire equipment shall conform to the design scheme and standard provisions, and the grounding wire resistance shall conform to the provisions.
5、防腐蝕:鋼預制構件應涂抹漆，耐腐蝕，用曝露地腳螺栓妥當維護;強浸蝕自然環境下的防銹對策應滿足設計規定;挪動室四周應順暢排水管道，不可存水，不可有臟物。
5. Corrosion prevention: the steel prefabricated components shall be painted to be corrosion-resistant and properly maintained with exposed anchor bolts; The anti rust measures under the strong etching natural environment shall meet the design requirements; The moving room shall be surrounded by smooth drainage pipes without water or dirt.
6、應恰當布局附墻板，使墻板表層光潔;置入板墻應裝穩定，應選用左右鋼筋搭接，外側往下重合，鋼筋搭接長短不可低于15mm。
6. The attached wallboard shall be properly arranged so that the surface of the wallboard is smooth; The embedded plate wall shall be installed stably. The left and right reinforcement shall be overlapped, and the outer side shall be overlapped downward. The overlapping length of reinforcement shall not be less than 15mm.
This is the end of the safety precautions and precautions for prefabricated houses. If you have any questions you don't understand, please come to our website http://szgdbearing.com Consult!
